Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in San Fernando, CA
Gate repair in San Fernando usually means working on a gate that was never designed for an automatic opener. Most homes here were built between the 1920s and 1950s, and their original wrought iron or wood gates have decades of heat, wind, and settling behind them. What starts as a noisy motor or a gate that won’t close is often the result of shifted pillars, rusted hinge posts, or a track packed with dust from the foothills. We repair all of it, and we’ll tell you exactly who is coming and what it will cost before anyone steps onto your property. Call (661) 425-9011 for a free estimate.
Why San Fernando Homes Are Different
San Fernando’s housing stock splits roughly into two groups: mid-century ranch homes with wide driveways, and older 1920s-30s bungalows on narrower lots. The second group is where we see the most distinctive work. Many of those original gates are still in place, hung on brick or stucco pillars that have shifted over the decades. Before the gate will close properly, we frequently have to shim or re-plumb the hinge posts. On narrow lots, gates often clear the sidewalk by only a few inches, so any sag at the hinge means the gate scrapes concrete. That’s a custom hinge job, not a parts-swap.
The climate compounds all of it. San Fernando gets long, hot, dry summers, and the intense sun fades and degrades opener housings and sensor lenses. Wood gates warp and crack; the occasional Santa Ana wind makes a warped gate flap and pull at its mounts. Dust and grit from the foothills work into rollers and tracks, grinding them down faster than you’d expect. In the neighborhoods north of San Fernando Road especially, we see pillars that have shifted enough that the gate hangs visibly out of square. The point is: repair work here usually starts with the structure, not the motor.
Styles & brands we work with
Our Main San Fernando Services
San Fernando homeowners most often call us for two things: gates that have stopped closing correctly, and openers or motors that have stopped responding. Each service has its own detailed San Fernando page linked below.
Gate Repair in San Fernando
Most Gate Repair in San Fernando calls involve sagging hinges, rusted posts, or gates that bind against a shifted pillar. On older wrought iron and wood gates, the original hinges are often decades old and simply worn out. We check the gate’s swing, the post alignment, and the latch geometry before recommending a fix, because replacing a hinge on a gate that is still out of square just buys you a few months. The written price comes before we touch anything.
Electric Gate Repair in San Fernando
When an automatic gate stops responding in San Fernando, heat and dust are usually involved. Electric Gate Repair in San Fernando often means diagnosing a sensor that has been cooked by direct sun, a control board that has taken a surge, or a safety edge that is too brittle to work reliably. We service the control side and the power side, and we check that the gate moves freely before we blame the electronics. You get a name and photo of your technician before arrival, every time.
Gate Motor Repair in San Fernando
A gate motor, the box that slides or swings your gate automatically, works harder in San Fernando than most people realize. Gate Motor Repair in San Fernando starts with a load test to see whether the motor is failing or the gate itself has become too heavy to move, which is common when wood gates absorb moisture or when rollers are packed with grit. We rebuild or replace the motor, set the limits and force correctly, and confirm the safety edges stop the gate under load.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in San Fernando
We carry parts for DoorKing, LiftMaster, Elite, and Mighty Mule, among others. Because we service these brands factory-trained, the right part and the right knowledge usually arrive together, which keeps San Fernando repairs to one visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in San Fernando, CA
These are the ranges we quote for common San Fernando gate jobs. Every price is written and agreed before any work starts.
| Service | Typical range in San Fernando |
|---|---|
| Gate repair service call | $95 – $145 |
| Gate hinge replacement (wrought iron) | $180 – $340 |
| Gate post re-plumbing or shimming | $220 – $450 |
| Gate opener repair (control board, sensor, or safety edge) | $240 – $520 |
| Gate motor replacement | $620 – $1,150 |
| Electric gate full service (motor, arms, safety check) | $450 – $900 |
| Gate track and roller replacement | $280 – $560 |
| Wood gate warp repair or re-hang | $260 – $480 |
| Brick or stucco pillar repair (hinge-side) | $300 – $600 |
In San Fernando, prices push toward the higher end when a pillar has shifted and needs re-plumbing, or when hinge work must be custom-fabricated to clear a narrow sidewalk. The quote you get is the price you pay. No surprise line items at the end, ever.
Neighborhoods We Serve in San Fernando
We cover all of San Fernando, including the older neighborhoods north of San Fernando Road, the mid-century tracts near Cesar E. Chavez Learning Academies, and the residential streets around San Fernando Recreation Park. Most calls in the city get same-day or next-day scheduling, and we never send a technician without sending a name and photo first.
- Neighborhoods north of San Fernando Road
- Areas around San Fernando Recreation Park
- Streets near Cesar E. Chavez Learning Academies
- Mid-century tracts southeast of downtown
- Bungalow districts west of Glenoaks Boulevard
Service Area – Cities Near San Fernando
Our San Fernando crews also cover the surrounding San Fernando Valley. That includes Sylmar, CA, Mission Hills, CA, Granada Hills, CA, and Panorama City, CA. If you’re just outside San Fernando proper, call us and we’ll confirm your street is in the service area, usually in under two minutes.
Serving San Fernando, CA - Our Local Coverage Area
We’re based in the San Fernando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Fernando
Most San Fernando jobs are scheduled same day or the next morning. Emergency calls for a gate that won’t close or secure are prioritized. Call (661) 425-9011 and a live person answers 24/7.
For most repairs and motor replacements, no permit is needed. If a job involves substantial structural work on a pillar or a full gate replacement, San Fernando may require a simple building permit. We’ll tell you if your job qualifies before we quote it.
Yes. This is one of the most common San Fernando repairs, especially in the older neighborhoods north of San Fernando Road. We re-plumb or shim the hinge posts before re-hanging the gate, so the repair holds rather than failing again in a season.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Fernando Customers Say
"Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R."Properly aligned the photo eyes and tested the auto reverse. Left a note of what he changed."
- Isaac N."Good repair on our gate operator board. Waited a couple days for the board to arrive, but he checked in. Works perfectly now."
- Monica P.