Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Reseda, CA
Warden Gate Repair handles gate work across Reseda, from 1950s wrought iron driveway gates on Sherman Way to newer automatic gates on ADU conversions. Reseda’s mix of mid-century ranch homes and recent multi-family builds means most jobs involve either aging steel and iron hardware or modern operator systems, sometimes on the same street. Hot, dry summers and Santa Ana winds loosen hinges, warp metal, and knock gates out of alignment faster than in coastal neighborhoods. If your gate sticks, sags, or won’t open, call (661) 425-9011 and we’ll send a technician with the written price before any work begins.
Why Reseda Homes Are Different
Reseda’s housing stock tells a specific story. Single-story ranch homes built from the late 1940s through the 1960s dominate the blocks north and south of the 101, and many still have their original ornamental iron pedestrian gates and driveway gates. Those gates were built well, but six decades of Reseda heat expansion and occasional rain have taken a toll at the hinge welds and base plates. We regularly see rust at the bottom of iron gates where alkaline soil holds moisture against the metal, even in a dry climate.
Newer multi-family developments and ADUs across Reseda have introduced a different generation of gates: aluminum and vinyl automatic gates paired with modern operators. These jobs require a different approach, often involving current electronics and low-voltage wiring rather than angle grinding and welding. Along the blocks just south of the 101, some original 1950s steel gates still carry old Reseda Ranch branding riveted onto the frame, which can make matching replacement parts a challenge that requires fabricating or sourcing from salvage. Knowing what you’re dealing with before the first tool comes out is half the job here.
Styles & brands we work with
Our Main Reseda Services
Most calls from Reseda homeowners fall into three categories: a gate that has stopped working entirely, an electric gate that opens only sometimes, or a gate motor that runs but no longer moves the gate. Each has its own dedicated page with local pricing and specifics.
Gate Repair in Reseda
Wrought iron and steel gates from the 1950s and 60s account for a large share of our Gate Repair in Reseda work. Common jobs include re-welding cracked hinge plates, replacing rusted base posts, and cutting away seized bolts. Reseda’s heat causes metal to expand and shift, so a gate that dragged in July may sit perfectly in January. We assess the whole gate, not just the obvious break, so the repair holds through the next Santa Ana wind event.
Electric Gate Repair in Reseda
When a driveway gate refuses to open or reverses halfway, the problem is usually in the operator, the safety sensors, or the low-voltage path feeding them. Our Electric Gate Repair in Reseda page covers diagnostics and repairs for systems on both vintage ranch homes and newer ADU installations. Reseda’s alkaline soil can corrode underground conduit and wiring over time, which means intermittent faults are often a buried connection wearing out rather than a failed board.
Gate Motor Repair in Reseda
If you hear the motor humming but the gate stays put, the issue sits in the gear train, limit switches, or drive mechanism. We service Gate Motor Repair in Reseda calls across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule units. Dust from Reseda’s dry summers works its way into gear housings and limit contacts, so we clean and lubricate as part of the repair rather than just swapping the failed part.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Reseda
We carry factory-trained service and common parts for Linear, Viking, Ghost Controls, and DoorKing, among others. Most common circuit boards, remotes, and safety edges are stocked in our local service vehicles, so a single visit resolves most Reseda jobs. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Reseda, CA
| Service | Typical range in Reseda |
|---|---|
| Gate repair service call and diagnosis | $75 – $125 |
| Hinge replacement (single gate) | $150 – $350 |
| Hinge replacement (double gate) | $250 – $500 |
| Weld repair on iron or steel gate | $120 – $400 |
| Gate realignment and adjustment | $100 – $250 |
| Electric gate troubleshooting | $100 – $200 |
| Gate motor replacement | $450 – $1,200 |
| Control board replacement | $250 – $600 |
| Safety sensor repair or replacement | $150 – $350 |
| Remote or keypad programming | $75 – $150 |
Prices in Reseda run higher when a 1950s gate needs custom fabrication for an obsolete part, or when underground wiring from an older home has to be re-run. Whatever the job, you get a written price before any work starts, with no added line items at the end.
Neighborhoods We Serve in Reseda
We cover all of Reseda, from the blocks south of the 101 up to the Northridge line and across to the Winnetka border. Our typical response for gate repair calls in Reseda is same-day or next-day, depending on the time of the call and part availability.
- Reseda Ranch
- South of the 101 corridor
- Reseda West
- Tarzana-adjacent stretches of Reseda
Service Area – Cities Near Reseda
In addition to Reseda, our crews regularly serve nearby communities across the west San Fernando Valley. If you’re in Winnetka, CA, Northridge, CA, Porter Ranch, CA, or Chatsworth, CA, we can schedule gate repair with the same written-price promise. Dispatch is coordinated from our Los Angeles office, and crews serve Reseda locally.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Reseda
Most Reseda calls are reached same-day or next-day. Because our technicians carry common Linear, Viking, Ghost Controls, and DoorKing parts in their vehicles, many repairs are completed on the first visit. Call (661) 425-9011 and we’ll confirm a window.
Most gate repairs and like-for-like replacements don’t require a Los Angeles city permit. If your project involves new footings, a new automatic operator, or changes to the driveway approach, the city may require plans. We’ll tell you what applies to your specific job before work starts.
We handle this often in Reseda, where mid-century gates are common. When an exact part is no longer manufactured, we fabricate a replacement or source a compatible modern component. The written price covers whatever approach your gate needs, agreed before any work begins.
If your gate is sticking, sagging, or completely stopped, call (661) 425-9011 for a free estimate from Warden Gate Repair. We’ll send a technician whose name and photo you’ll have before they arrive, with a written price in hand. Cole Rafferty leads our team, and every job carries the 365-Day Done Right Promise: if the repair isn’t right, the return visit is free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Reseda Customers Say
"Gate was closing on my truck bumper. The loop detector had failed. Replaced it and adjusted the force setting."
- Dina K."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R."Properly aligned the photo eyes and tested the auto reverse. Left a note of what he changed."
- Isaac N.